Thank you for visiting our website. Your personal privacy is absolutely respected and protected by the website. To help you understand how the website collects, uses and protects your personal information, be sure to read the website "Privacy Policy". Thank you!
ACCEPT AND PROCEED
RSSRSS

Products

Oscilloscope Differential Probe 100 MHz Scope
Home  ›   Products  ›  Oscilloscope Probes

Oscilloscope Differential Probe 100 MHz  Scope

HP-100 Oscilloscope Differential Probe 100 MHz Scope

 

 facebook
Product ID: DP-100

Differential Probe
Model: DP-100 ( 6.5KVp-p / 100MHz )

 The DP-100 Differential probe provides a safety means for measuring differential voltage to all models of oscilloscope.  The DP-100 coverts the high differential voltage (<=7000 peak) into a low voltage (<=7.0v, with reference to the earth) and display on the oscilloscopes.  The DP-100 is designed to operate with the 1M Ohm impedance oscilloscope. When combine with the 50 Ohm load, the attenuation will be 2 times. We recommend to use Tecpel PL-10 with DP-100 to expand the measuring with Digital multimeter (DMM) to observe more accurate measurement. The accuracy of oscilloscope is 3% and the DMM is less than 1%. Note: If you connect DP-100 to the DMM without PL-10 the accuracy will be higher than 10%.

 

 

Specifications:
  • SPECIFICATIONS
    • Differential Voltage DC + pk AC:6500V
    • Bandwidth ( 50 Ω load -3dB ):100MHz( x100 50MHz)
    • Common Mode Voltage DC + pk AC:6500V
    • Common Mode Voltage RMS CAT II:6500V
    • Common Mode Voltage RMS CAT III:6500V
    • Attenuation ( Switchable ):X 100, X 200, X 500, X 1000
    • Input R ( Each input ):27MΩ ± 1%
    • Input C ( Each input ):2.5 PF ± 2%
    • Maximum Operation Voltage( DC + pk AC )
    • ≦ ± 650V at X 100
    • ≦ ± 1300V at X 200
    • ≦ ± 3250V at X 500
    • ≦ ± 6500V at X 1000
    • Common Mode Rejection Ration
    • ( C M R R )
    • 60 Hz : > 20,000 : 1
    • 100 Hz : > 2,000 : 1
    • 1 MHz : > 600 : 1
    • Noise ( Into 50Ω load ):≦ 1 m Vrms
    • Input Impedance ( between input):54 MΩ // 1.25 PF
    • Accuracy ( at 20 ~ 30℃ 70% RH after 20 minutes ):≦ ± 1.5 %
Features:

Differential probe for oscilloscope

4 RANGE ATTENUATOR
2 POWER SOURCE
6500V HIGH VOLTAGE INPUT.
SEPARATING DESIGN, CONVENIENT, DURABLE
MEET IEC1010, UL3111, TUV GS, CAT III 6500V

Certificate:
  • CE

Contact Detail

Contact:Stanley Hwang
Address: 3F., No.12, Lane. 130, MinQuan Road., XinDian Dist., New Taipei City 23141, TAIWAN
TEL:886-2-2218-3111
FAX:台灣-2-2218-3222
Email:tecpelco@gmail.com
URL:http://www.tecpel.com
http://www.tecpel.com.tw
ZIP:23141