Thank you for visiting our website. Your personal privacy is absolutely respected and protected by the website. To help you understand how the website collects, uses and protects your personal information, be sure to read the website "Privacy Policy". Thank you!


handheld 20MHz Digital Storage Oscilloscope with color LCD Dispaly
Home  ›   Products  ›  Oscillosocpes

handheld 20MHz Digital Storage Oscilloscope with color LCD Dispaly

OS-1022 20MHz handheld osciloscope Scopemeter Packaging

handheld 20MHz Digital Storage Oscilloscope with color LCD Dispaly

OS-1022 20MHz handheld oscilloscope Scopemeter packaging

Product ID: OS-1022

20MHz Handheld Oscilloscope
2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display

1. Autoscale
2. 20 Automatic Measurements
3. 3 in 1(DSO+Multimeter+Cymometer)
4. Bandwidth: 20 MHz
5. Support USB for data transmission to PC
6. Replaceable li-ion battery back up (6 hours)
7. USB Flash Disk Storage
8. FFT

How to use handheld oscilloscope? Tecpel Video demonstration.






Model  : OS-1022





 Bandwidth  20MHz 

 Sample rate(Real time)  100MS/s  

 Horizontal Scale(S/div)  5ns/div~100s/div,step  by 1~2.5~5  

 Rise time(at input,typical)  ≤17.5ns

 Channels  Dual

 Display  3.7 inch color display with TFT panel(640×480 pixels)

 Dimension  180mm(L)x115mm(H)x40mm(W)

 Weight  645g

See more complete detail
Model Name  OS-1022
 Bandwidth  20MHz
 Sample Rate ( Real time )  100MS/s
 Horizontal Scale(S/div)  5ns/div~100s/div
 step by 1~2.5~5
 Rise time(at input, typical)  ≤17.5ns
 Display  3.7 inch color display with TFT panel(640×480 pixels, 65535 colors)
 Channels  Dual
 Input impedance  1MΩ±2%,in parallel with 20pF±3pF
 Record length  Max. 6000 points on each channel
 Interpolation  (sin x)/x
 Probe attenuation factor  1X,10X
 Input coupling


 DC accuracy(Average)  Average>16:±(5% reading+0.05div) for △V
 Vertical Sensitivity  5mV/div~5V/div (at input)
 Vertical resolution (A/D)  8 bit(2 channels simultaneously )
 Max. Input Voltage  400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1)
 Trigger Type  Edge, Video, Alternate
 Trigger Mode  Auto, Normal, Single
 Trigger level  ±6 divisions from screen center
 Acquisition modes  Sample, Peak Detect and Average
 DC gain accuracy  ±3%
 Automatic Measurement  Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot
 ,Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B
 Delay A→B
 Waveform math  +, -, ×, ÷, FFT
 Waveform storage  4 waveforms
 Bandwidth  20MHz
 Phase difference  ±3 degrees
 Communication interface  USB
 Power supply  100V-240V AC, 50/60Hz
 Li-ion battery  7.4V, 6 hours operation
 Multimeter specifications
 Full scale reading  3 3/4 digits (Max.4000-count)
 Input Impedance  10 MΩ
 Capacitance  51.2nF-100uF:±(3%±3 digit)
 Voltage  VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 1000V, VAC:4V,40V,
 Frequency:40Hz-400Hz, Max:input:AC 750V(virtual value)
 Current  DCA:40mA, 400mA:±(1.5%±1 digit) 10A:±(3%±3digit)
 DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 10A:±(3%±3digit)
 Impedance  400Ω:±(1%±3digit), 40Ω
 General specifications
 Interface  USB Data Cable (Transfer waveform data to a PC)
 Power  Supply:100V~240V AC,50/60Hz   DC input: 8.5VDC, 1500mA 
 Battery: 6 hours
 Dimension  180mm x 115mm x 40mm
 Weight  645g
  • CE

Contact Detail

Contact:Stanley Hwang
Address: 3F., No.12, Lane. 130, MinQuan Road., XinDian Dist., New Taipei City 23141, TAIWAN