Measuring Instrument - LCR Precision Instruments(LCR-200) Produkte ID: LCR-200

Measuring Instrument


Measuring instrument is an essential tool of ensuring accuracy of measurement, for transactions by consumers and industry in every day life, such as water meters, taximeters, electricity meters, weighing machines, etc.





Tecpel provides you high quality LCR measuring instruments which are pieces of electronic test equipment used to measure, among other things, the impedance of a component.





Our measuring instrument can be used in various fields because of that our products have wide meter ranges. Besides, our Dual Liquid Crystal Display with LED back lit is a help to use LCR measuring instrument easily. P>


A good LCR measuring instrument has automatic component recognition. In addition, having basic measurement accuracy of 0.1 %is also important.


 


With advanced technology of measuring instruments , our products will be more preciser and easily-used. The measuring instruments of Tecpel can fit your need.



Please also see our hot products as below:
ph meter
Measuring Instrument
thermometers
Multimeter
temperature meter
Sound Level Meter
clamp meter



Key Features:
Measurement Parameters : Z , Ls , Lp , Cs , Cp , DCR , ESR , D , Q , and (Theta)
Test conditions : 100MHz , 120Hz , 1KHz , 10KHz , 100KHz , 200KHz ; 1Vrms , 250mVrms , 50mVrms , 1Vdc(DCR only)
DMM Functionalities
Dual LCD Display with LED backlit
Open / Short calibration
Remote binning capability
Auto range / range hold selection



Zertifikat:CE
  • LCR200 SPECIFICATIONS:
    • Test Condition :
    • Frequency : 100Hz / 120 Hz / 1KHz / 10KHz / 100KHz / 200KHz
    • Level : : 1Vrms / 250m Vrms / 50m Vrms / 1Vdc (DCR only)
    • Measurement Parameters : : Z, Ls, Lp, Cs, Cp, DCR, ESR, D, Q and Theta
    • Basic Accuracy : : 0.1 %
    • Dual Liquid Crystal Display with LED backlit
    • Auto Range or Range Hold selection
    • Open / Short Calibration
    • RS232C Interface
    • Primary Parameters Display
    • Z : AC Impedance
    • DCR : DC Resistance
    • Ls : Serial Inductance
    • Lp : Parallel Inductance
    • Cs : Serial Capacitance
    • Cp : Parallel Capacitance
    • Secondary Parameters Display
    • (Theta) : Angle Impedance
    • ESR : Equivalent Series Resistance
    • D : Dissipation Factor
    • Q : Quality Factor
    • Combinations of Display
    • Serial Mode : Z-Theta, Cs-D, Cs-Q, Cs-ESR, Ls-D, Ls-Q, Ls-ESR
    • Parallel Mode : Cp-D, Cp-Q, Lp-D, Lp-Q
    • DMM Functionalities:
    • DCV, ACV, DCA, ACA, Diode/Continuity Check
    • Measurement Range
    • Parameter Range
    • Z 0.000 Ohm to 500.0 M Ohm
    • L 0.030 micro H to 9999 H
    • C 0.003 pF to 80.00 mF
    • DCR 0.000 Ohm to 500.0 M Ohm
    • ESR 0.000 Ohm to 9999 Ohm
    • D 0.000 to 9999
    • Q 0.000 to 9999
    • Theta: -180.0 degree to 180.0 degree
    • V 0.000mV to +/- 600.0 V
    • I 0.000mA to +/- 2.000 A
    • DC Voltage Measurement:
    • Range : 2V, 20V, 200V, and 600V
    • Resolution : 1mV, 10mV, 100mV,1V
    • Accuracy : +/-(0.4 %+3Digit)
    • Input Impedance : 1M Ohm
    • AC Voltage Measurement ( True RMS ):
    • Range : 2V, 20V, 200V, and 600V
    • Resolution : 1mV, 10mV, 100mV, 1V
    • Accuracy : +/- (0.8%+5Digit) @ 40Hz~1KHz
    • Input Impedance : 1M Ohm
    • DC Current Measurement:
    • Range : 2A, 0.2A, 20mA and 2mA
    • Resolution : 1mA, 0.1mA, 0.01mA and 1 micro A
    • Accuracy : ±(0.4%+3Digit)
    • Input Impedance: 0.1 ohm @ current > 20mA , 10 Ohm @ current< or = 20mA
    • AC Current Measurement ( True RMS ):
    • Range : 2A, 0.2A, 20mA and 2mA
    • Resolution : 1mA, 0.1mA, 0.01mA and 1 micro A
    • Accuracy : +/- (0.8%+5Digit) @ 40Hz~1KHz
    • Input Impedance : 0.1 ohm @ current > 20mA , 10 Ohm @ current < or = 20mA
    • Continuity Check :
    • Continuity Threshold : 50 Ohm ( Approximately )
    • Continuity Indicator : Tone Buzzer
    • Input Protection : 600V ( max )
    • Diode Test: Test current : 2.5mA ( Typical )
    • Open circuit voltage : 5.0VDC ( nominal)
    • Input Protection : 600V ( max )
    • General:
    • Temperature : 0 to 40 deg C ( Operating ) -20 to 70 deg C ( Storage )
    • Reative Humidity : Up to 85%
    • AC Power : 110V / 220V +/- 10%, 60 / 50 Hz
    • Dimensions : 300mm x 220mm x 150mm (11.8"" x 8.7"" x 5.9"" ) (DxWxH)
    • Weight : 4.5kgsStandard Accessories:
    • (1) TL09C KelvinClip : 1pc
    • (2) Test leads : 1pc
    • Optional Accessories:
    • (3) TL09A SMD test probe
    • (4) TL09B Component fixture