Analog High Voltage Test Probe test meter
Model: HVP-40M Features:
DC 40KV CAT II Pollution 2
600M Ohm Impedance
25KV ± 2%, 40KV ± 3%
T.C. 200 ppm/°C.
Positive Polarity only.
Resolution 1KV
No Need power.
CE, IEC1010
Other recomended digital High Voltage meter.
HVP-40DM Digital High Voltage meter
SPECIFICATIONS ( 20 ± 5℃, RH < 80% )
! WARNING !
Before taking any measurements, first connect the alligator clip of this probe to earth ground and make sure connection is electrically good.
Input impedance:2000MΩ
Maximum operation voltage:40KV DC , CAT II , Pollution 2
Polarity:Positive / Negative
Display:3999 digital, LCD
Accuracy:Full Range ≦ 1.0% ± 2 digital
Temperature Coefficient:≦ 100ppm / ℃
Maximum loading Current:≦ 20μA
Maximum loading power:≦ 0.8 watt
Voltage Range:40KV / 4KV / 400V / 3 Range
Voltage resolution:10V / 1V / 0.1V
Power source:9V / 006P, IEC6L R1, NEDA 1604A
Low battery Indicate:≦7.3V Auto Indicate
Battery Life:About 200hr ( ALKALI )
Auto power off:About 30 mim
PEAK HOLD:≧ 400 ms
Sampling:4 Sampling / sec
Operating temperature:0 ℃ ~ + 50 ℃
Storage temperature:- 20 ℃ ~ + 70 ℃
Ground lead length:90cm ( 35 " )
Dimensions:420 L x 80ψ
Weight:360g
Contact: | Stanley Hwang |
Address: | 3F., No.12, Lane. 130, MinQuan Road., XinDian Dist., New Taipei City 23141, TAIWAN |
TEL: | 886-2-2218-3111 |
FAX: | 台灣-2-2218-3222 |
Email: | tecpelco@gmail.com |
URL: | http://www.tecpel.com http://www.tecpel.com.tw |
ZIP: | 23141 |