Products AC/DC Current Clamp meter

Category:

Contact us：(02) 2218-3111
E-mail：sales@oka.com.tw
UT-278A can measure the grounding system quickly and safely without disconnecting the circuit ground wire or requiring auxiliary electrodes. The display resolution can reach 0.001Ω, and the leakage current can be measured up to 30A. The clamp part adopts double insulation design, which can effectively block interference signals in the environment. It is the best tool for measuring ground impedance.
UT-278A
Clamp Earth Ground Testers
DCM-043 digital weak current meter can measure the AC current of the equipment. The smallest display can be 0.001A.
DCM-043
Clamp Meter/Transmitter ~ 1mA High Resolution
DCM-033B AC/DC Digital Clamp Meter . it is an alternating current tester with 6000 digits display. The minimum displayable is 0.01A.
DCM-033B
6099 AC/DC Clamp meter 400A W.TEMP
DCM-032B AC/DC Digital Clamp Meter . it is an alternating current tester with 6000 digits display. The minimum displayable is 0.01A.
DCM-032B
4099 AC Clamp meter
Oscilloscope Current Probe PA-622 (DC-300KHz ; ≧10mA)
PA-622
Pintek Current Probe
DCM-210 True RMS AC/DC Digital Clamp Meter 1mA
DCM-210
100A True RMS Mini Clamp multimeter
Digital Flexible Clamp Meter AC True RMS
UT-281A
True RMS Flex Clamp meter
UT-233 is a high-stability power tester with the functions of an ammeter and a power meter. It can measure voltage, current, power, virtual power, power factor, phase angle, etc.
UT-233
Power Clamp meter 1p-2w;3P-3w,3p-4W AC 1000A; Phase Sequence Test
UT-220
2000A AC Digital Clamp
UT-211B True RMS AC/DC Digital Clamp Meter
UT-211B
60A True RMS Mini Clamp multimeter
UT-210E True RMS AC/DC Digital Clamp Meter
UT-210E
100A True RMS Mini Clamp multimeter
UT-208 AC/DC Digital Clamp Meter
UT-208
AC/DC 1000A CLAMP W/TEMP.
UT-206A AC/DC Digital Clamp Meter
UT-206A
AC/DC 1000A CLAMP W/TEMP.
UT-200A digital clamp meter can measure the alternating current of the equipment and the minimum display can be 0.001A.
UT-200A
Digital clamp meter 1999 AC Clamp + Temp. 2A/20A/200A
TES-3063 can measure AC and DC power and can be recorded in the tester. After connecting to a computer, the relevant data can be downloaded.
TES-3063
Digital clamp meter Watt Power Factor Meter
Prova-11 High Precision Clamp Meter. The smallest can be displayed to AC 0.1m
Prova-11
Clamp Meter mini amp high resolution
DCM-2604D AC current tester is a tester for high current measurement. It can measure AC 1000A and has the function of diode and capacitance measurement.
DCM-2604D
1000A AC Clamp Meter
DCM-2608D AC/DC current tester is a tester for high current measurement. It can measure AC 1500A and DC 2000A. It has the function of diode and capacitance measurement.
DCM-2608D
AC 1500A DC 2000A Clamp Meter
DCM-2609D AC/DC current tester is a tester for high current measurement. It can measure AC 1500A and DC 2000A. It has the function of diode and capacitance measurement.
DCM-2609D
AC 1500A DC 2000A Clamp Meter
DCM-040 AC leakage current tester can be used to measure the weak difference between the live wire and the neutral wire in the power line.
DCM-040
AC Leakage Current Tester
DCM-039 AC clamp meter can measure the AC current of the equipment, and the minimum display is 0.001A.
DCM-039
3 3/4 AC/DC Clamp meter
DCM-033A AC clamp meter can measure the AC current of the equipment, and the minimum display is 0.001A.
DCM-033A
3999 AC/DC Clamp meter 400A W.TEMP
The DCM-032A AC clamp meter can measure the AC current of the equipment, and the minimum display is 0.001A.
DCM-032A
1999 AC Clamp meter400A
CM-07 AC/DC valve can measure the AC current of the equipment and the minimum display can be 0.001A.
CM-07
AC/DC CLAMP METER (Prova)
The CA-600 current hook is mainly used to convert the measured current to voltage output, so that the equipment in the later stage can obtain the current measurement value. CA-600 can be used with a digital meter or oscilloscope.
CA-600
AC / DC Current Clamp Meter
The CA-60 DC/AC current hook is mainly used to convert the measured current into a voltage output mode, so that the equipment in the later stage can obtain the current measurement value. CA-60 can be used with a digital meter or oscilloscope.
CA-60
AC/DC Current Transducer with banana connection
The CA-1000D clamp transmitter is mainly used to convert the measured current to voltage output, so that the equipment in the later stage can obtain the current measurement value. CA-1000D can be used with a digital meter or oscilloscope.
CA-1000D
1000 Amp AC/DC Clamp Adapter
UT-204R Digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, featuring overload protection, high reliability, high safety and high accuracy.
UT-204R
600A Digital Clamp Multimeters
UT-204A digital clamp meter can measure the alternating current of the equipment and the minimum display can be 0.001A.
UT-204A
400~600A Digital Clamp Multimeters
TECPEL DCM-036A 3,999 display digital AC Clamp meter [discontinued]
DCM-036A
Digital clamp meter AC current
UT-203 digital AC and DC clamps can measure AC and DC voltage and current. The operation is simple and easy to use which is in line with the basic measurement of various places.
UT-203
3,999 Digital Clamp Meter
UT-204 digital clamp meter can measure the alternating current of the equipment and the minimum display can be 0.001A.
UT-204
Digital clamp meter 3999 AC/DC Clamp Meter+VI Freq