100W Programmable DC Power supply
Brand
GWINSTEK
|
Model
PFR-100L
|
🇹🇼 Taiwan
The entire PFR-100 series provides output terminals on the front and rear panels. The front output terminals shorten the time for users to replace the test leads when adjusting the panel functions; the rear output terminals can facilitate the wiring of the rack assembler.
The height of 3U, the width of 70mm, and the weight are about 2.5KG, which greatly improves the portability of PFR-100.
In addition, using Multi-drop mode can control up to 31 PFR-100 at the same time, without using another switch/Hub.
It can help customers save the cost of equipment acquisition.
Out of Stock
Views: 592
Specifications
- Output Voltage10mA
- Output Current10A
- Output Power40mV ( 0.1%) / 20mA ( 0.2%)
- Accuracy100W
- Voltage Resolution8mA
- Current Resolution0.1%, 40mV
- Voltage Limit Regulation Rate0.2%, 20mA
- Voltage Load Regulation Rate0.1%, 40mV
- Current Limit Regulation Rate0.2%, 20mA
- Current Load Regulation Rate1.5ms
- Voltage Ripple50ms
- Current Ripple100ms
- Rise Time50ms
- Fall Time100ms
- Response Time1.5ms
Features
- Channels5 ~ 55V
- Output Control1~11A
- Over Voltage Protection (OVP)0~52.5V
- Over Current Protection (OCP)1 ~ 11 A
- Voltage (UVL)0 ~ 52.5 V
- Over Temperature Protection (OTP)Output
- AC-Fail ProtectionOutput
- CommunicationLAN, USB, RS-232 / RS-485. GPIB
- Analog Control
- SpecificationNo Output
Attributes
- Operating Temperature0 ~ 40°C / 20 ~ 80% RH; No
- Storage Temperature-20 ~ 70°C / 0 ~ 85% RH; No
- Power SupplyAC 85 ~ 265 V, 47 ~ 63Hz,
- DimensionsSee datasheet
- WeightUSB, RS-232, RS-485;: LAN/GPIB
Recommended