10kHz Handheld LCR Meter
Brand
GWINSTEK
|
Model
LCR-1010
|
🇹🇼 Taiwan
LCR-1010 is a GWINSTEK handheld LCR meter with 10kHz maximum test frequency, 50,000-count dual display, 0.2% basic accuracy and USB Type-C connectivity.
Out of Stock
Views: 91
Description
LCR-1010 is a GWINSTEK LCR-1000 Series handheld LCR meter with a maximum test frequency of 10kHz. It is suited for component troubleshooting, field service, incoming inspection, education labs and quality testing. The instrument uses a 2.8-inch TFT touch LCD, provides 50,000 counts on both primary and secondary displays, and offers 0.2% basic accuracy for capacitance, inductance, resistance, impedance, quality factor, dissipation factor, phase and DC resistance measurements. Auto LCZ, sorting, data hold and USB-HID / USB-VCOM support make it practical for standalone work as well as PC software or remote-command data acquisition. LCR-108 tweezers test fixture is optional.
Specifications
- Test Frequency50Hz / 100Hz / 120Hz / 1kHz / 2kHz / 10kHz selectable
- Display CountsMain display 50,000 counts; sub display 50,000 counts
- Capacitance Range1pF to 50mF, depending on selected test frequency
- Capacitance Accuracy+/-(0.2% rdg + 2 counts) to +/-(3.0% rdg + 10 counts)
- Capacitance Resolution0.001pF to 0.001mF, depending on display range
- Inductance Range0.5uH to 1000H, depending on selected test frequency
- Inductance Accuracy+/-(0.2% rdg + 2 counts) to +/-(2.5% rdg + 10 counts)
- Inductance Resolution0.001uH to 0.1H, depending on display range
- Impedance Range0.05ohm to 10Mohm, depending on selected test frequency
- Impedance Accuracy+/-(0.2% rdg + 2 counts) to +/-(3.0% rdg + 20 counts)
- DC Resistance Range0.05ohm to 10Mohm
- DC Resistance Accuracy+/-(0.2% rdg + 2 counts) to +/-(3.0% rdg + 5 counts)
- Test Signal LevelAC 0.3V / 0.7V / 1.0Vrms selectable; DC +/-1V
- Test SpeedFast 10 readings/s; slow 2.5 readings/s
- Output Impedance100ohm
Features
- 2.8-inch Color Touch LCDTFT LCD displays primary and secondary parameters with touch operation.
- 15 Measurement CombinationsSupports C-D, C-Q, C-R, L-D, L-Q, L-R, L-Rdc, R-Q, R-X, R-Rdc, Rdc, Z-D, Z-Q and Z-theta combinations.
- Auto LCZ ModeAutomatically identifies the DUT type and starts measurement.
- Sorting ModeSupports +/-1%, +/-5%, +/-10%, +/-20% and custom percentage comparison.
- Data HoldLocks the current reading for field recording.
- USB ConnectivityUSB-HID / USB-VCOM interface for PC software and SCPI-compatible remote control.
- Open/Short ZeroZero, open and short correction functions help improve measurement stability.
Attributes
- Display2.8-inch color LCD with touch operation
- Measurement WiringSupports 2-wire or 5-wire measurement
- Equivalent CircuitSeries / parallel selectable
- Other FunctionsAuto range, backlight, data hold, zero, auto power off
- InterfaceUSB Type-C
- Power Supply7.4V rechargeable lithium battery
- Dimensions90(W) x 195(H) x 41(D) mm
- WeightApprox. 380g
- Included AccessoriesUser manual, Safety Instruction Sheet, LCR-100 Short circuit bar, LCR-101 Kelvin Clip, LCR-205 USB Cable, LCR-305 Rechargeable Lithium Battery, LCR-503 Carry Bag
- Optional AccessoryLCR-108 Test Fixture (Tweezers) for SMD/Chip Components
- LCR-108 Tweezers FixtureOptional accessory
