TECPEL - Propel Quality Measurement
|
|
Autoranging + 20A + Temperature
Model：DMM 8088
Features
:
| ☆ 3 3/4 digit, 4000 count display |
|
|
| ☆ Auto-ranging on DC/AC volts, frequency, and capacitance. | ||
| ☆ Resistance, diode and continuity test | ||
| ☆ Read pulse duty cycle and dwell angle for electronic fuel injection | ||
| feedback carburetors, and ignition. | ||
| ☆ Inductive RPM pickup. | ||
| ☆ Milliseconds pulse width to test on-time of fuel injectors, idle air | ||
| control motors, and electronic transmission controls. | ||
| ☆ Temperature measurement | ||
| ☆ Max/Min, Data Hold, Zero(relative readings) functions. | ||
| ☆ Overload Protection on all ranges. |
| Model : DMM 8088 | |
| Click here for larger image |
Specifications :
| DC Voltage Ranges: | 400mV,4V,40V,400V,1000V ±(0.5%+1dgt) |
| AC Voltage Ranges: | 400mV,4V,40V,400V,750V ±(2.0%+5dgt) |
| DC Current Ranges: | 400mA ±(1.0%+1dgt), 20A ±(1.5%+1dgt) |
| AC Current Ranges: | 400mA±(1.5%+3dgts), 20A ±(2.0%+3dgts) |
| Resistance Ranges: | (Auto-ranging) 400Ω,4kΩ,40 kΩ,400 kΩ,4000kΩ,40MΩ. ±(2.0%+4dgts) |
| Capacitance Ranges: | (Auto-ranging) 4nF,40nF,400nF,4uF,40uF. ±(2.0~5.0%+4dgts) |
| Frequency Ranges: | (Auto-ranging) 100Hz,1kHz,10kHz,100kHz,400kHz. ±(0.1%+4dgts) |
| Temperature Ranges: | -50 to 1100℃ ±(1.0%+2℃);-50 to 2000℃±(1.0%+4℃) |
| Frequency Ranges: | (Auto-ranging) 100Hz,1kHz,10kHz,100kHz,400kHz.±(0.1%+4dgts) |
| RPM Ranges: | 600 to 4000 low; 1000 to 12000 high |
| RPM (TACHO) manual ranging ±(2%+1dgt) | |
| Dwell Angle: | 4,5,6,8 Cylinders ±(2.0%+5dgts) |
| Duty Cycle: | 0.0 to 90.0% ±(2.0%+5dgts) |
| ms Pulse Width: | 0.1ms to 10.0ms ±(2%+0.2ms) |
| Diode Test | 0.6mA typical ±(2.0%+4dgts) |
| Audible Continuity | Open circuit voltage:0.4V DC, Audible threshold:<40Ω |
| Overload protection: | 1000VDC or 750VAC RMS for DC/AC Voltage; |
| 0.5A,20A/600V Fused for DC/AC Current | |
| 60VDC or 24VAC RMS for temperature | |
| 500VDC or AC RMS for other ranges | |
| General | |
| Power Requirement: | One 9V battery |
| Dimensions: | 2"x3.8"x7.9" (52x96x200mm) |
| Weight: | 17.5oz(495g) |
| Accessories: | Test Leads,holster, battery, owners manual,K-type |
| Thermocouple probe,Inductive RPM pickup probe. | |
| Optional Accessories: | CA-600 DC/AC current Clamp, 400Amp. |
Inductive RPM Pickup Probe HP-01
Standard accessory for DMM 8088
 |
|
||||||||||
